[OZAPRS] D700A

[Richard Hoskin]

Hi Rodney,

The best way to use the D700 with a laptop is to connect the two together
using the RS232 cable and put the D700 in to TNC mode (not APRS mode).

The D700 will act as a normal TNC and radio combination.

Cheers
Richard
VK3JFK

> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Mitch
> Sent: Thursday, 29 September 2005 8:26 AM
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] D700A
> 
> 
> 
> Hi all,
> 
> Great work with that those sat pages Andrew!
> 
> OK...the manual seems a little ambiguous to me regarding the DATA out
> connection to a laptop running UIVIEW.
> 
> If out in the bush...no digis around: I'd like to hook up lappy simply
to
> at least see myself without disturbing the setup as it is installed
> thoroughly into the vehicle.
> 
> How can packet data, RX and TX be fed to a lappy in data form? Lappy
sound
> cards are average usually and I have only disappointing 'decode'
> performance when trying to read distant packets via sound card despite
> fiddling with levels etc.
> 
> Is it possible to read the Kenwood's TNC?
> 
> Probably blindingly simple solution so please excuse posting as in a
hurry
> to get this going for long weekend!  :))))
> 
> 
> 73s de Rod, VK5KFB.
> 
> 
> 
> 
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs