[OZAPRS] Enquiry: Trimble SVee6 antenna and NMEA

Richard Hoskin vk3jfk at amsat.org
Wed May 4 22:47:03 EST 2005


Hi Dave,

Yes you can program the SVee 6 for NMEA. Iet me know if you need the SVee
6
program.

The GPS realy needs an antenna with a pre-amp in it. Most GPS antennas
will
work ok.

Cheers
Richard.
VK3JFK

> -----Original Message-----
> From: ozaprs-bounces at marconi.ics.mq.edu.au [mailto:ozaprs-
> bounces at marconi.ics.mq.edu.au] On Behalf Of VK3KQT (David)
> Sent: Wednesday, 4 May 2005 9:23 PM
> To: ozaprs at marconi.ics.mq.edu.au
> Subject: [OZAPRS] Enquiry: Trimble SVee6 antenna and NMEA
> 
> Gday all,
> 
> I have a Trimble GPS unit Part No 23198-63 which I understand is a TAIP
> unit.  Can this unit do NMEA?
> 
> Also I have no antenna does any body know what is required?  It is a SMB
> connector and 5Volts on centre pin so I assume an active antenna.   If I
> built a homebrew patch antenna how much gain do I need?
> 
> Thanks
> 
> Dave VK3KQT
> 
> 
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list