[OZAPRS] Oncore GPS receiver interfaces.

Richter, Mike W Michael.Richter at team.telstra.com
Sun Sep 12 16:27:21 EST 2004


Ron

I would like one with TinyTrak Clone and Switching Reg (demanding, aren't
I )

Mike VK2BMM

-----Original Message-----
From: Ron Graham [mailto:rongraham at magnet.aust.com]
Sent: Sunday, 12 September 2004 12:39 PM
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] Oncore GPS receiver interfaces.


Hi all,
          Have a few of the above surplus ..two types .. both plug onto
and 
attach to the Oncore PC board (and same size as) .. both normally fitted 
with 12V in linear regulator, but may have switching regulator optionally 
fitted.
a) RS-232 interface.
b) as above but with TinyTrax clone added.
          Some were prototypes, some have discoloured PCB solder tracks, 
some as new.
Please enquire re your preference.

Regards, Ron, VK4BRG. 
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs




More information about the Ozaprs mailing list