[OZAPRS] VK3WRM-1 UIDigi.

[Andrew McDade]

Gday Ron etc.

Have you got 3WRM beaconing at all on 30m ? .. If not , then would it be
possible to make it beacon every half hour or so. Id be keen to see what
30m
is doing between us during the course of the day. ( probably nothing,
given
the fact I havnt seen a HF beacon from it !!! )

cul .. Andrew... VK5EX

----- Original Message -----
From: "Ron Perry" <ronk at sunlinux.com.au>
To: "OZ-APRS" <ozaprs at marconi.ics.mq.edu.au>
Sent: Tuesday, May 25, 2004 12:08 PM
Subject: [OZAPRS] VK3WRM-1 UIDigi.


> FYI,
> As discussed with Richard VK3JFK at Castlemaine, this digi has been
> switched to 144.900MHz to test the path to and from VK3RMK-1.  This will
> probably stay on that frequncy for a couple of months.
>
> I have VK3ECV-3 beaconing on 144.900.
>
> I was hearing beacons being digied from further south on the way back
> from the VK3WRM-1 site on the D700 (VK3JAW-9) in the car.
>
> The VK3WRM IGATE in Mildura will still operate on 145.175MHz (and
> 30metres)
>
> Now I'll investigate the HF issues raised.
>
> Regards,
> Ron
>
>
>
>
>
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.688 / Virus Database: 449 - Release Date: 5/18/2004

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs