[OZAPRS] GT Oncore Modules

[Brenton Meadows Motorola GPS]

Firstly what firmware version is the unit.
If 2.10 or 2.2 use the motorola software GPS Winoncore 12 and it will give
you a neat tick a box toggle to set the unit up.  There is a very easy
wizard setup as well.  Email me if you have not got the software, email me
and I will send it up to you

Brenton VK5SZ

brenton at posnav.com.au  

-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Ron and Val
Smith
Sent: Saturday, May 15, 2004 6:09 AM
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] GT Oncore Modules

Hi All,
I have obtained a small number of the gps modules mentioned a short time
ago.
Has anybody found the software to work with the Morotola Binary Protocol
to
command these to NMEA?
I have made an interface for rs232 and it switchable from inverting to
non-inverting but all I see is gibberish and sending the @@Ci command from
the keyboard does not work.
Cheers
Ron
vk4ags


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs