[OZAPRS] Recommended TT2 settings
Richard Hoskin
vk3jfk at amsat.org
Sat Jun 26 19:43:30 EST 2004
Hi Grant,
Your TT2 settings should be something like;
TX Delay 300ms
Auto TX Rate 120sec (2min)
Manual TX Delay 125ms
Quiet Time 500ms
Calibration 128
Enable Mic-E
Enable Smart Beaconing and set the;
Slow speed to around 5MPH and the slow beacon rate to 1800
Fast speed 55MPH and the fast beacon rate to 180
Min turning angel 60
Turn Slope 255
Min Turn Time 5sec
Cheers
Richard
VK3JFK
_____
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Grant Stowell
Sent: Friday, 25 June 2004 3:46 PM
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] Recommended TT2 settings
Hi All,
What are the recommended settings for "Timing" in the TT2 tracker? I have
500ms, 2 minutes, 1052 msec and 130 for calibration.
Only just getting back into APRS and forgot what I used to use.
Thanks Grant VK3HFS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20040626/8bcd7ffa/attachment.htm
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT04557.txt
Url: http://second.aprs.net.au/pipermail/ozaprs/attachments/20040626/8bcd7ffa/attachment.txt
More information about the Ozaprs
mailing list