[OZAPRS] Cheapest solution for DIGI ?

[Richard Hoskin]

Hi Mike,

I can write an EPROM for you for UIDIGI if needed.

You would need to talk to PACCOM for a version 5 firmware for the TNC320.
This was the last release of firmware. It contains some APRS functions but
I'm not sure if it will allow HF APRS. You'd need to look at their web
site.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at marconi.ics.mq.edu.au [mailto:ozaprs-
> bounces at marconi.ics.mq.edu.au] On Behalf Of Richter, Mike W
> Sent: Wednesday, 23 June 2004 5:59 PM
> To: ozaprs at marconi.ics.mq.edu.au
> Subject: RE: [OZAPRS] Cheapest solution for DIGI ?
> 
> 1. Where can I obtain a  UIDIGI EPROM
> 
> 2. Where can I obtain a current-version EPROM for a TNC-320 so that I
can
> use it for APRS on HF
> 
> Mike VK2BMM
> 
> -----Original Message-----
> From: Ron Perry [mailto:ronk at sunlinux.com.au]
> Sent: Wednesday, 23 June 2004 05:45 pm
> To: OZ-APRS
> Subject: Re: [OZAPRS] Cheapest solution for DIGI ?
> 
> 
> For a standalone system, UIDIGI EPROM in a TNC-2 into an FM828
> Regards,
> Ron
> vk3ecv
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs