[OZAPRS] KPC3 (non plus) version?

[Robert Thirkettle]

Hi All
	The old Kantronics KPC3 can  not be upgraded to a KPC3 plus as
the have a completely different EPROM from memory the KPC3 has a 500k
and the KPC3 Plus has a 1M EPROM the Micro I think is different as well.

Regards Rob ZL3RX
 

-----Original Message-----
From: Darryl Smith [mailto:Darryl at radio-active.net.au] 
Sent: Friday, 5 September 2003 12:46 a.m.
To: ozaprs at marconi.ics.mq.edu.au
Subject: RE: [OZAPRS] KPC3 (non plus) version?


You can buy new EPROMS from Kantronics

Darryl

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International] 
Darryl at radio-active.net.au | www.radio-active.net.au  

-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Steve Clarke
Sent: Thursday, 4 September 2003 7:52 AM
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] KPC3 (non plus) version?


Hi all,

I have a KPC3 which now has v6.0 firmware (upgraded a couple of years
ago). I see on the website the current version is 8.2 (like my 9612+).
Would anybody happen to  have an Image of this eprom. Thats how I
upgraded the kpc3 to do aprs last time, but would like to be able to use
the v8.2 digi settings for some tests / demos for the NSW RFS.

I have the v6.0 bin file if needed.

Thanks
Steve.

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs