[OZAPRS] KPC3 (non plus) version?

[Darryl Smith]

You can buy new EPROMS from Kantronics

Darryl

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International] 
Darryl at radio-active.net.au | www.radio-active.net.au  

-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au] On Behalf Of Steve Clarke
Sent: Thursday, 4 September 2003 7:52 AM
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] KPC3 (non plus) version?


Hi all,

I have a KPC3 which now has v6.0 firmware (upgraded a couple of years
ago).
I see on the website the current version is 8.2 (like my 9612+). Would
anybody happen to  have an Image of this eprom. Thats how I upgraded the
kpc3 to do aprs last time, but would like to be able to use the v8.2 digi
settings for some tests / demos for the NSW RFS.

I have the v6.0 bin file if needed.

Thanks
Steve.

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs