[OZAPRS] 30m VK3 H.F. Gateway
Chris Hill
chris.hill at crhtelnet.com.au
Wed Oct 22 00:41:45 EST 2003
Hi Bob,
Thanks for the support on this!
(I'm not popping up on the VK-APRS mailing list until we have a working
APRS
gateway on 30m... which will be on the international frequency).
73 Chris vk6kch
-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au]On Behalf Of Bob Bruninga
Sent: Tuesday, 21 October 2003 9:56 PM
To: ozaprs at marconi.ics.mq.edu.au
Subject: Re: [OZAPRS] 30m VK3 H.F. Gateway
On Tue, 21 Oct 2003, Noel Rowe wrote:
> >the gateway is back on air on the same frequency as before, 10.149 LSB,
>
> As the actual frequency of the transmitted output is dependent on the
> TNC used, is it possible to publish the frequency of the tones rather
> than the LSB frequency? This will make it easier for us to keep a
> listening watch, as we may not be using a similar TNC.
And it still makes no sense to me why Australia needs its own HF freq.
Why not join the rest of the APRS world on 10.149.2 MARK tone, 10.149.4
SPACE tone. SImply subtract yoru own modem's audio tones and operate USB
on that dial frequency.
de WB4APR, Bob
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list