[OZAPRS] What's Happened to HF APRS in VK?
Chris Hill
chris.hill at crhtelnet.com.au
Tue Oct 14 21:08:23 EST 2003
Hi Richard,
Would you be happy to operate on (approx) 10148.13kHz USB ?
Regards,
Chris
vk6kch
-----Original Message-----
From: ozaprs-bounces at marconi.ics.mq.edu.au
[mailto:ozaprs-bounces at marconi.ics.mq.edu.au]On Behalf Of Richard Hoskin
Sent: Tuesday, 14 October 2003 7:33 AM
To: ozaprs at marconi.ics.mq.edu.au
Subject: RE: [OZAPRS] What's Happened to HF APRS in VK?
Hi All
Bob wrote:
>>
>> 1) "too close" to the band edge is groundless concern for the last 20
>> years since we have digital synthesized rigs.
Then Warren replied:
>That's fine providing your HF rig will allow you to transmit when it is
>"out
>of band"
This reminded me of one of the Main reasons we used 10.149Mhz for HF
APRS in VK3. The Kenwood digital synthesized transceiver we are using
will not transmit above 10.149.999Mhz.
Cheers
Richard
VK3JFK
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list