Digis and Paths was [OZAPRS] aprsd215

Tony Hunt wavetel at iname.com
Sun Apr 6 15:44:05 EST 2003


Ron .. Do you want a hand to configure a Ui-digi eprom.. We could even
burn
one for you here at a pinch if you cant do eproms.. Thats if your not
going
to run digi-ned on a PC for a digipeater so to speak..

Tony Hunt  VK5AH  wavetel at iname.com

----- Original Message -----
From: "VK5UJ - Joseph Burford" <joe at vk5uj.com>
To: <ozaprs at marconi.ics.mq.edu.au>
Sent: Sunday, April 06, 2003 10:01
Subject: Re: Digis and Paths was [OZAPRS] aprsd215


>
> Ron,
>
> >For the Igate, I been offered a  site very close to the intersection of
> >the  Calder and Sturt Hwy, which has a mast and excellent takeoff to
all
> >points of the compass...and further away from the pagers than I am.
>
> >For a digi. there is a 2m beam at about 200ft on a tower some 17km East
> >of Mildura, pointing about SE. This would certainly cover the Sturt Hwy
> >to Robinvale and beyond.  It may even cover some of the Calder Hwy
>
> Sounds great. If you need a hand let me know, might have to do a weekend
> trip sometime :-)
>
> Good luck getting something running.
>
> Cheers,
>
> Joe VK5UJ
>
>
> _______________________________________________
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
> http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list